Forend Solutions For Bergara TC4700 45-70 Govt Barrels

The FULL contour diameter of Bergaras TC4700 45-70 GOVT barrel has created some creative opportunities as to which forend to use. Bergara makes a great line of interchangeable Encore/Prohunter barrels in many calibers BUT standard Encore/Prohunter rifle forends DO NOT fit, they are just a shade to the small side. Syn thetic rifle forends can be modified but will require a certain level of skill to accomplish and then that forend may not be reusable on your other rifle barrels. The easiest solution is to use your muzzleloader forend if you have one. I know the mounting screws are different but simply remove the forend bushings from below your muzzleloader barrel and reinstall them below your rifle barrel and install the forend, it fits perfectly. Note, care must be taken not to strip those tiny screws that hold the bushings on and I recommend using a hollow ground screwdriver sized correctly. Another solution utilizing a shotgun forend is still under investigation and requires using longer rifle forend screws and washers to install your shotgun forend to the rifle barrel. I also believe these solutions will apply to the laminate stocksets that I sell. More later....... Until then be safe and shoot straight. Marty
Read More From HausOfArms
More results: 1 2 3 4 5 6 Next Page